You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
Click for a closer view
hydraulic fork lift
for Allis- Chalmers lawn and garden tractors
Here is the perfect answer to light materials handling needs where a larger, more expensive fork lift is not warranted. Maneuverable and compact, the Allis-Chalmers single tower fork lift works well in cramped quarters. It raises, lowers and tilts load forward or backward. Its hydraulic power system is easily controlled at the operator's fingertips.
Lift capacity is 500 lbs. on 15" centers to a height of 5'6". Tines are 32"
long; width easily adjusts for different size pallets. The single lift tower affords good visibility. Tower tilts forward or backward to help operator carry and place
load accurately and safely.
SPECIFICATIONS
Click for a closer view
Hydraulic Fork Lift
Lift Capacity @ 15" Load Center
500 lbs.
Maximum Lifting Height
66 inches
Time of Lift
7 seconds
Tilt Forward
10 degrees
Tilt Back
10 degrees
Overall Height (Mast Fully Raised)
92 inches
Overall Height (Mast Down)
59-1/4 inches
Mast Type
Single Stage with 2-spool Control Valve
Fork Length
32 inches
Overall Length (from front of Counterweight to end of forks)
115-3/4 inches
Ground Clearance
5 inches
Hydraulic System
Front crankshaft-driven hydraulic pump with integral reservoir
Pump capacity @ 2000 RPM
1.5 gpm
Maximum operating pressure
1250 psi
Hydraulic system capacity
2.5 qts.
Screen type oil filter in suction line
Tilt cylinder bore 1-3/4"; stroke 4"
Lift cylinder bore 1-1/4"; stroke 33"
Allis-Chalmers reserves the right to make changes or add improvements to
these specifications without notice or obligation.
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES
ALLIS-CHALMERS
Source: Allis-Chalmers sales/spec sheet, LG
128/649,
courtesy of Del Allen
