Keep it simple... keep it going... and keep it!


Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.


The snow plow is shipped from the factory in 2 cartons. The larger carton contains the rotor housing, skid shoes, drift cutters, spout, "V" belt for spout, and hot air deflector for engine.

The smaller carton contains the drive pulleys and belts, one "V" pulley, "V" belt, push bar assembly, front lift rod, spout adjusting handle, support bracket, pins and hair pin cotters.

Click each picture for a closer view

To assemble the snow plow, proceed in the following sequence:

1. Assemble the push bar assembly to the rear of the rotor housing using 2 hex cap screws 1/2" - 13 x 2-1/2" 1g. and 2 hex nuts
1/2-13 as shown in figure 1.

figure1.jpg (55268 bytes)
Figure 1

2. Assemble the skid shoes to each side of the rotor housing as shown in figure 2.

figure2.jpg (48985 bytes)
Figure 2

3. Assemble the drift cutters in place on each side of the rotor housing as shown in figure 3.

figure3.jpg (51971 bytes)
Figure 3

4. Apply a coating of light oil to the neck of the discharge spout mounting collar and install the spout in place on the rotor housing as shown in figure 4. The application of oil is necessary to prevent rust and to allow the spout to rotate freely. Clamp "V" belt around spout as shown in figure 4, and loop belt around adjusting pulley. To adjust tension of "V" belt, turn the hex nut at point "A" in Figure 4. Avoid excessive tension.

figure4.jpg (48985 bytes)
Figure 4

[Source: Simplicity Instructions and Parts List, 36" Rotary Snow Thrower for Riding Tractor, Article No. 990175, courtesy of John Kenney]




NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.


Please support our sponsors  . . . 
and help keep this site free for your use.