Keep it simple... keep it going... and keep it!


Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.


Click for a closer view

figure3.jpg (56408 bytes)
Figure 3

figure4.jpg (55623 bytes)
Figure 4


Drive pulley and belt are rnounted in the drive shaft of the tractor.  Refer to Figs. 3 & 4. 

Remove two capscrews joining the front flex coupling to the engine pulley. (See Fig. 3)
Discard the two spacers between coupling and engine pulley.  Insert hydraulic pump drive
pulley with belt. (See Fig. 4)  Replace capscrews through pulley.


Remove front pivot pin from yoke in rear lift rod.  Remove two upper capscrews from bevel gear housing.  Mount cylinder mounting bracket with two longer capscrews provided.

Click for a closer view
figure5.jpg (56168 bytes)
Figure 5


[Source:  Allis-Chalmers publication,  Form No. TM-431, included in B-12 Owners Manual courtesy of Mark Waite & Joel Wicker]




NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.


Please support our sponsors  . . . 
and help keep this site free for your use.