Keep it simple... keep it going... and keep it!


Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.


Click for a closer view
figure8.jpg (32297 bytes)
Figure 8

It is important to have the control valve handle and quadrant stops adjusted before mounting pump in tractor. Adjust as follows:

1. Adjust handle to lay half way between quadrant adjusting capscrews when handle is in the "Hold" position. Adjustment is made by removing pump pulley and loosening the three self locking lever adjusting capscrews. Move pump mounting bracket on adjusting capscrews to relocate lever "Hold" position. Retighten adjusting capscrews securely.

2. Adjust quadrant stops to hold lever in "Float" position. To "float", lever must be held all the way to position "A" or "B". When adjusting, loosen quadrant adjusting capscrews and move lever to position "A". Move quadrant stop to hold lever in this position. Move lever to position "B" and adjust the other quadrant stop to hold lever at position "B". Retighten quadrant adjusting capscrews. Quadrant stops should hold lever in the extreme position in either direction for "Float".


[Source:  Allis-Chalmers publication,  Form No. TM-431, included in B-12 Owners Manual courtesy of Mark Waite & Joel Wicker]



NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.


Please support our sponsors  . . . 
and help keep this site free for your use.