You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.
Follow the sequence of steps as outlined below.
2. Attach the sickle bar assembly to the bottom plate of the cutter bar lever assembly, using 2 hex capscrews and 1 plow bolt. Refer to Fig. 2. To each of the capscrews, add 4 flat washer's to act as spacers between the cutter bar lever assembly and the sickle bar assembly. Add 1 flat washer as a spacer for the plow bolt. Secure with lockwashers and hex nuts. The plow bolt uses a lock nut instead of a lockwasher and hex nut.
3. Connect the free end of the drive link assembly to the sickle head by means of a spacer, hex capscrew, flat washer, and hex lock nut as furnished. Insert the spacer into the hole in drive link end so the head of spacer is between the sickle head and drive link. Refer to Fig. 3.
NOTE: This site is designed to be viewed in at least 1024 x 768
resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.
It may not display correctly in other resolutions or on other devices.
Links on this site are monetized.
liability or responsibility for the accuracy of
data on this site.