Keep it simple... keep it going... and keep it!


Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.



The 36" Rotary Snow Thrower is shipped partially assembled. For ease of assembly, unpack and spread out all parts.


1. Attach L.H. and R.H. skid shoes to the rotor body assembly with 3/8" x 3/4" NC carriage bolts, plain washers and lockwashers. Secure with full hex nut. The shoe is adjustable for specific requirements. (See front cover.)

2. Attach hitch assembly to rotor assembly with 3/8" x 1-1/2"NF hex capscrew, plain washer and spring washer. Secure with hex locknut. (See Fig. 2. )

3. Tip thrower forward to attach drive belt to rotor housing. Loosen clamp on tube and slide guard off pulley, place V-belt around pulley and reposition guard.  Be sure that the top lip of the guard contacts the under side of the deck. Retighten clamp on tube. (See Fig. 2.)

Click for a closer view
figure_2.jpg (38813 bytes)

Figure 2


[Source:  Owner's Manual, 36" Rotary Snow Thrower (2029938), Allis-Chalmers Outdoor Products Division, FORM TM-7033]



NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.


Please support our sponsors  . . . 
and help keep this site free for your use.